Mobile application mooded hack crack free unlock codes

*#06# IMEI

P2K test menu:
*#06#, menu, menu, 048263*

P2K Test comands:
32*116*1*0*0 - Read phone code
32*118*1*0*0 - Read security code
18*0 - Factory reset, phone code off
18*1 - Master reset
54*18*1 - Full phone reset
10*0*6 - Select 900/1800
32*279*1*0*8 - Model
32*383*1*0*0 - Flex version

Motorola MPX200, MPX220, MPX100 service codes
Hard reset MPX200, MPX220 - blue button + power on

- blue button + power on Hard reset
*#**837# Version info
*#**372# FQC
*#**364# Engineering menu
*#**266*0# Set as data COM port
*#**266*1# Set as log COM port
*#**797# Time to failure timer & Power down code
*#**2263*0# Set to default Band
*#**2263*1# Disable GSM Band
*#**2263*2# Disable DCS Band
*#**2263*3# Disable EGSM and DCS Band
*#**2263*4# Disable PCS Band
after I press a button SEND.

Motorola E365 Service code
#02#-check version
# 02 #-test version
# 02 # - firmware version, hardware etc.

# 03 #-monitoring network
# 03 #-net monitor

# 04 # battery-monitoring
# 04 #-battery menu

# 08 #-efem menu
# 08 #-efem menu

# 09 # test buttons, sound, screen
# 09 # test all
# 09 # phone test......

**0101# -test sim auto answer
**0102# -WARNING!!! fmgr format(Better to make a backup!!)
**0104# -select on/off (Just what? ... Did not understand)
**0105# -engineer menu off
**0105# -engeneer menu off

** 0106 #engineer menu
** # 0106 - Engineering menu (only the font there is not me ...)

audio g1033gain
audio path (both, external, internal)
aec mode (Long/short select, aec reset, noise limit, aec echo, aec)
lcd mode (contrast, bright)
melody
font view (12X12 or 7x12)
vibrate
lcd test
adc view
driver test all

** # 0107 - something so quickly showed marked with errors
that it is not clear that this

** 0108 # failure counter
** 0109 # TFT counter reset
* 073 887 * Unlock Sim. Password when you enter "000000."

Service codes Motorola C350
Service menu in the Motorola C350
To enter the service menu must quickly press a combination of
the following keys: * Menyu048263
You should be prompted to enter commands:
Opcode :___________
Then you can type commands
For example, 54 * 18 * 1 - full phone reset.
(54 * - obligatory for all the top teams)

Teams:
0*0*0 - Select tone 0
0*0*1 - Select tone 1
0*0*2 - Select tone 2
0*0*3 - Select tone 3
0*0*4 - Select tone 4
0*0*5 - Select tone 5
0*0*6 - Select tone 6
0*0*7 - Select tone 7
0*0*8 - Select tone 8
0*0*9 - Select tone 9
0*0*124 - Select tone 1 KHz
0*0*125 - Select tone 2 KHz
0*0*126 - Select tone 3 KHz
0*0*127 - Select tone 4 KHz
0*1*X - Disable tone X
3*0*1 - Enable vibrator
3*0*0 - Disable vibrator
4*3*1 - Enable speech coder full rate Audio loopback
4*3*0 - Disable speech coder full rate
4*4*1 - Enable speech coder enhanced full rate
Troubleshooting C350 Series
4*4*0 - Disable speech coder enhanced full rate
4*5*1 - Enable speech coder half rate
4*5*0 - Disable speech coder half rate
5*0*0 - Set audio level 0 Audio level
5*0*1 - Set audio level 1
5*0*2 - Set audio level 2
5*0*3 - Set audio level 3
5*0*4 - Set audio level 4
5*0*5 - Set audio level 5
5*0*6 - Set audio level 6
5*0*7 - Set audio level 7
5*0*8 - Set audio level 8
5*0*9 - Set audio level 9
5*0*10 - Set audio level 10
5*0*11 - Set audio level 11
5*0*12 - Set audio level 12
5*0*13 - Set audio level 13
5*0*14 - Set audio level 14
5*0*15 - Set audio level 15
6*2*2*0*0 - Set Audio Path.
Int Mic, IntSpk, RX unmute, TX unmute

6*4*6*0*0 - Set Audio Path.
Boom Mic, Boom Spk, RX unmute, TX unmute

10*0*3 - Set band GSM 900
10*0*4 - Set band DCS 1800
10*0*5 - Set band PCS 1900
10*0*6 - Set dual band GSM 900 / 1800
10*1*0 - Read band 3= GSM 4= DCS 5= PCS 6 =GSM/DCS
18*0 - Initialize non-volatile memory (Master Reset)
18*1 - Initialize Non-volatile memory (Master Clear)
20*X*0 - Load Channel number X Select Channel
(Used for debugging Rx mode)

0*1*0 - Load channel number 1 GSM Low channel
20*62*0 - Load channel number 62 GSM Mid channel
20*124*0 - Load channel number 124 GSM High channel
20*512*0 - Load channel number 512 DCS Low channel
20*700*0 - Load channel number 700 DCS Mid channel
20*885*0 - Load channel number 885 CDS High channel
20*512*0 - Load channel number 512 PCS Low channel
20*661*0 - Load channel number 661 PCS Mid channel
20*810*0 - Load channel number 810 PCS High channel
55*2*001 - Test Display. All pixels ON
55*2*000 - Test Display. All pixels OFF
55*2*002 - Test Display. Checkerboard pattern A
Table 2. Manual Test Commands (Continued)
Key Sequence Test Function/Name Remarks
Level 1 and 2 Service Manual Troubleshooting
55*2*003 - Test Display. Checkerboard pattern B
55*2*004 - Test Display. Border pixels ON
*#06# - IMEI Check No Test Mode Required

TURNING NETMONITORA: Menu 00 ** 83,786,633 *
VYLYUCHENIE NETMONITORA: MENU 00 ** 8378633 *
pressing need to very quickly.
Turn off the tube, and it appears every time.
Exit the menu / back: menu - left soft key

in permament test mode
(* hold 2 sec)
***113*1*[OK] net monitor

MOTOROLA 3xx

*#06# and quick 'menu-key' and 048263* (Push the key quickly!)
and entering at field "OPTCODE" you must try several times.
If not working try with MOTO TEST CARD inserted.

Security code - 32*118*1*0*0
Model - 32*279*1*0*8
Flex ver - 32*383*1*0*0
Master Reset - 18*0
Master Clear - 18*1
Set band GSM 900 - 10*0*3
Set band DCS 1800 - 10*0*4
Set band PCS 1900 - 10*0*5
Set dual band GSM 900/1800 - 10*0*6
Read band - 10*1*0 => 3-GSM, 4-DCS, 5-PCS, 6-GSM/DCS
User code - 32*116*1*0*0 /coded:00310032003300340000 - 1234/
Read imei - 32*4*1*0*0 "OK" /coded:083a05092700247709 - 350907200427799/

47*4*1*0*9*081A32547698103254 => IMEI=123456789012345
it is possible to change IMEI

T205/T19x (ACER)

Motorola T190, T191, C200, C205, T205
Master Code - 19980722, 20010903

*#300# OK List the Software and Hardware version
*#301# OK Full Keypads functional Test
*#303# OK Set Default Language to English
*#304# OK Set OFF engineering mode
#304*19980722# OK Set ON engineering mode
*#305# OK Location: 1 OK
*#307# OK Engineering Test Mode
*#311# OK Phone code changed to default code
*#400# OK ADC, Cal val*
*#402# OK Adjust Display Intensity / Contrast
*#403# OK List the Manufacturing Informations
19980722 OK Master Unlock code for Phone and Sim Lock

*3370# EFR ON (enhanced full rate)
#3370# ERF OFF
*#72837726# OK Confirm ?, Data saver
1234 OK Phone code default
*#0000# OK Setting saved, restore set phone do default language
*#0048# OK Fast change polish langpack
*#0007# OK Fast change russian langpack

*#302# OK Acoustic test*

7.1 Greeting
7.2 Main VlmGain
7.3 Input Cal
7.4 Output Cal
7.5 Side In Gain
7.6 Vox Gain
7.7 Min Mic Engy
7.8 M re
(a) In Vlm Gain
(b) Aux Vlm Gain
(c) Silence Prd
(d) Supp Prd
(e) In Volume
(f) Out Volume
(g) Icon
(h) Image
(i) Animation

The remaining codes work only in "test mode".
It can be unlocked,
using the program Compal Service Tool
go to Handset Specific.
Click the button Read Data. We wait until the initial version of the firmware
FLEX-A, etc. Then press the button EFEM ON.
In the Message, which opens at startup
should be written:

Trying to Write Data to MS...
EFEM Set OK!
Read Handset Specific Data Begin
All the "test mode" is enabled.

# 08 # - "expert-menu"
# 03 # - Network - Monitor the level of RF signal
(to disable the code type it again)
# 04 # - the battery - the monitor voltage levels at the control points
(to disable the code type it again)
** # 0108 - Error counter control
** 0101 # - Test SIM auto answer
** 0102 # - Reset all settings, ringtones, phonebook, etc.
** # 0105 - out of "test mode"
** # 0106 - Engineering menu
** 0109 # - Reset the counter TFT (meaning you can see by entering # 02 #)